 | Atlas Copco 100% oil-free compressed air has passed the ISO8573-1 CLASS 0 and TUV 100% oil-free compressed air certification. The ordinary screw air compressor uses lubricating oil to cool and lubricate the rotor during operation. The compressed air contains oil, which will adhere to the valves, instruments, and pipelines of the equipment along with the compressed air, causing permanent damage and pollution to the equipment. These serious damages will lead to instrument failure and even production accidents; During the production process, product quality may decrease due to oil pollution. |
Atlas Copco's oil-free air compressor uses special coating to prevent rotor wear, so the compressed air is completely free of oil. 100% compressed air can save you costs in two ways: firstly, the production capacity is improved while the product is stable; Secondly, the invasion of oily compressed air into downstream equipment increases maintenance work and increases the possibility of equipment shutdown. Therefore, 100% oil-free compressed air can bring low usage fees, low maintenance costs, and improved product quality and production capacity. During pipeline blowing and pressure testing, compressed air containing oil can cause significant hazards, such as explosions. |  |
 | The atmosphere contains water vapor, and the water content increases when the atmosphere is compressed. The water content of these compressed air entering the pipeline system is 100%. When the air cools, the water vapor condenses into water, which will damage the pipeline system and terminal products. However, by using Atlas Copco's heatless regenerative adsorption dryer, you can obtain a pressure dew point below -40 degrees, completely avoiding the risk of equipment and product damage to the greatest extent. The dew point of compressed air after drying can reach -40 ℃~-70 ℃. |
 | Similarly, small particles in the air that cannot be seen with the naked eye may affect the quality of your products. Atlas Copco's precision dust filter can ensure the stability of your product and the reliability of precision equipment. The dust removal level of filtered compressed air can reach 0.01 μ M. |
